Extension Pin (Personal Identification Number) - Panasonic KX-TDA50G Feature Manual

5.1.6 Extension PIN (Personal Identification Number)

Features
Paralleled Telephone
Hot Line
*1
Timed Reminder
*1 These features can be programmed to not be canceled by Extension Feature Clear.
This feature is also known as Station Program Clear.
Conditions
•
Extension Dial Lock (® 5.1.4 Extension Dial Lock) and the extension personal identification number (PIN)
(® 5.1.6 Extension PIN (Personal Identification Number)) will not be cleared by this feature.
•
If dial tone 2 is heard after Extension Feature Clear:
After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: Call
Waiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard when
going off-hook. (® 4.1.3 Dial Tone)
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features—
4.17 [2-9] System Options—Option 2
→ Extension Clear—Call Waiting
→ Extension Clear—Fwd/DND
→ Extension Clear—Hot Line (Pickup Dial)
Operating Manual References
1.3.25 Extension Feature Clear
5.1.6 Extension PIN (Personal Identification Number)
Description
Each extension user can be assigned a personal identification number (PIN) through system programming or
personal programming (Extension PIN [Personal Identification Number]). This PIN is used to set features or
access the extension remotely.
The following features require a valid PIN:
a.
Live Call Screening (LCS)
b.
Incoming and Outgoing Call Log Display Lock (® 16.1.3 Speed Dialing, Personal), Personal Speed Dialing
Display Lock (® 3.1.3 Call Log, Incoming)
c.
Walking Extension (® 20.1.2 Walking Extension)
d.
Extension Dial Lock (® 5.1.4 Extension Dial Lock)
e.
Walking COS (® 20.1.1 Walking COS)
f.
Walking COS through DISA (® 4.1.7 DISA (Direct Inward System Access))
If an extension user has assigned an extension PIN, the PIN is required when activating this feature.
*1
96 Feature Manual
Paired SLT will ring.
Off
Cleared
Extension Feature Clear
(® 19.1.4 Voice Mail DPT (Digital) Integration)
*1
After Setting
Document Version 2008-11