Panasonic KX-TDA50G Feature Manual page 280

15.1.2 Ring Tone Pattern Selection
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single
: :
Conditions
•
"PT Ring Off Setting" can be enabled or disabled through system programming. If disabled, PT users
cannot turn incoming call ringing off for their extension.
•
For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can be
assigned through personal programming.
PC Programming Manual References
4.14 [2-8-1] Ring Tone Patterns—Call from CO—
4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone—
4.16 [2-8-3] Ring Tone Patterns—Call from Others—
4.17 [2-9] System Options—Option 1—
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 1— Ring Pattern Table
→Option 6— ICM Tone
6.5 [4-1-4] Wired Extension—Flexible Button—
CO, Single CO, Group CO, ICD Group, SDN)
6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
6.17 [4-3] DSS Console—
Group CO, ICD Group, SDN)
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
3.1.4 Customizing the Buttons—To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or
INTERCOM button (Digital proprietary telephone only)
280 Feature Manual
CO Line Call/Hold
Doorphone Call
Recall
TRG1 TRG2 ... Port 1
Single Single
Double Double
: : :
PT Operation—PT Ring Off Setting
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Timed
Reminder
Port 2 ...
: : : :
Ring Tone Pattern Plan 1–8
Ring Tone Pattern Plan 1–8
Extension—Ring Tone Pattern Plan 1–8
Optional Parameter (Ringing Tone Type Number) (for Loop
Ring Pattern Table
External
Call Back LCS
Sensor
: : :
Document Version 2008-11