Panasonic KX-TDA50G Feature Manual page 250

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA50G:
Table of Contents

Advertisement

13.1.15 Private Network Features—NDSS (Network Direct Station Selection)
maximum, the data is discarded. This is used to prevent data from circling unnecessarily around the
network.
11.2 [9-2] Network Data Transmission—
—Data Transmission Counter
If it is not possible to remotely turn off transmission of extension status information using the NDSS Monitor
Release feature because of network conditions, it is possible to perform the same operation directly through
system programming at the monitored PBX.
6.8 [4-1-6] Wired Extension—NDSS Link Data - Send
6.15 [4-2-4] Portable Station—NDSS Link Data - Send
When using a VoIP network, if extension status information is lost by the network, in some cases an NDSS
button may not be able to display the status of the relevant extension.
NDSS can not be used when two PBXs are networked using the TIE Line Call by Own PBX Extension
Number feature (® 13.1.13 PRIVATE NETWORK FEATURES).
PC Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—
Networking Data Transfer
4.11 [2-7-1] Class of Service—COS Settings—Extension Feature—
6.5 [4-1-4] Wired Extension—Flexible Button
Type
Dial (for NDSS)
6.8 [4-1-6] Wired Extension—NDSS Link Data - Send
6.13 [4-2-3] Portable Station—Flexible Button
Type
Dial (for NDSS)
6.15 [4-2-4] Portable Station—NDSS Link Data - Send
6.17 [4-3] DSS Console
Type
Dial (for NDSS)
11.2 [9-2] Network Data Transmission
11.3 [9-3] Network Operator (VoIP)
11.4 [9-4] NDSS Key Table
PT Programming Manual References
[511] Manager Assignment
Feature Manual References
13.1.13 PRIVATE NETWORK FEATURES
13.1.18 PRIVATE NETWORK FEATURES—QSIG
13.1.23 Private Network Features—VoIP (Voice over Internet Protocol)
Operating Manual References
1.2.1 Making Calls
2.1.4 Private Network Features—NDSS (Network Direct Station Selection) Monitor Release
250
Feature Manual
Network Data Transmission for Centralized Operator Feature
Manager
Document Version 2008-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda50Kx-tda600

Table of Contents