Panasonic KX-TDA50G Feature Manual page 287

Number in
the Pattern
(9) CD (Condition
Code)
(10) Cost
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR
[Programmable Items]
Item
Outgoing CO line call
Incoming CO line call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Caller's identification
Document Version 2008-11
Data
Shows other call information using the following codes:
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
RM: Remote maintenance (modem) (® 13.1.6 PC Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Controls whether outgoing CO line calls are shown. This setting is
common throughout the PBX. COS programming is also required.
13.1 [11-1] Main—SMDR—
[804] SMDR Outgoing Call Printing
Controls whether incoming CO line calls are shown.
13.1 [11-1] Main—SMDR—
[805] SMDR Incoming Call Printing
Controls whether outgoing intercom calls are recorded.
13.1 [11-1] Main—SMDR—
Controls whether the Log-in/Log-out status of extensions is
recorded.
13.1 [11-1] Main—SMDR—
Controls whether the user-dialed number or the ARS-modified
number is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 1.1.3 ARS (Automatic Route
Selection))
13.1 [11-1] Main—SMDR Options—
Controls whether the caller's identification number, name, number
and name, or nothing is shown. If "none" is selected, <I> will not
be shown.
13.1 [11-1] Main—SMDR Options—
Number & Name
16.1.1 SMDR (Station Message Detail Recording)
Description
Description
Print Information—Outgoing Call
Print Information—Incoming Call
Print Information—Intercom Call
Print Information—Log-in / Log-out
SMDR Options—ARS Dial
SMDR Options—Caller ID
Feature Manual 287