Setting User Parameters - Adam Equipment HIGHLAND SERIES User Manual

Changing the value of the internal weight will affect the calibration when
using the internal calibration. To check if your internal weight is correct
you should only use high quality weights that are accurate to the
readability of the balance.
6.7

SETTING USER PARAMETERS

The balance has a number of parameters the user can adjust.
Display Description
Filter settings, 1, 2 or 3
n FIL
1 is the fastest filter, 3 is the slowest.
The Automatic Rezero range
n ZEO
0 to 8, 0 being with auto zero off, and 8 is the zero
range of 4 divisions.
Stability symbol range, 0 to 5
n STA
0 is the smallest stability range and 5 is largest.
n ZTR Weight Tracking Range, 0 to 5
Press the [Tare] key to view the current settings.
To change the settings press the [Mode] key.
the next parameter. When completed the display will show F7 SET again.
Pressing [Mode] will then show TECH. This function is a manufacturing function for
qualified technicians only and you can press [Mode] again to scroll through
parameter options, or press [Print] to return to normal weighing.
19 |
P a g e
Press the [Tare] key to advance to
© Adam Equipment Company 2011
Default Value
1 FIL
4 ZEO
2 STA
3 ZTR