Right Switch - Suzuki DL1000AL4 Owner's Manual

NOTE:
• The line drawings on page 47, 48, 49, 50 and 51
show the proper routing of the control cables,
hose and wirings.
• Refer to them in addition to following the instruc-
tions carefully.
A: Front brake hose
B: Throttle cables
C: Right switch wiring harness
D: Clutch hose
E: Left switch wiring harness
THROTTLE
Install the throttle assembly with two Allen bolts.
NOTE:
Align the dot mark on the handlebars with the mat-
ing surface of the throttle housing.
 WARNING
Improper throttle installing can interfere with
smooth throttle grip operation. It can result in
an accident.
Check to ensure that the throttle operates
freely and closes automatically.
A: Throttle assembly
B: Allen bolt
C: Dot mark

RIGHT SWITCH

Insert the boss of right switch housing into the hole on
the handlebars.
Install the right switch assembly with the two screws.
Pinching the lead wires in the parts can short or
break circuit.
Check the lead wire routing when assembling
the switch.
A: Boss
B: Hole
C: 5 × 45 mm screw
9
NOTICE