Handlebar Balancer - Suzuki DL1000AL4 Owner's Manual

HANDLEBAR BALANCER

Assemble the handlebar balancer parts as shown.
A: Balancer weight
B: 6 × 105 mm screw
C: Flange rubber cushion L:34.0 mm
D: Spacer L:50.0 mm
E: Washer OD:16.0 mm ID:6.5 mm T:1.6 mm
F: Rubber cushion L:15.0 mm
G: 6 mm spacer nut
Tighten the screw a little.
Insert the balancer sub-assembly into the handlebar
end all the way.
Tighten the screw securely.
 WARNING
Improper handlebar balancer fitting can inter-
fere with smooth throttle grip operation. It can
result in an accident.
Check to ensure that the throttle operates
freely and closes automatically.
A: Balancer assembly
13