Removing The Bracket - Suzuki DL1000AL4 Owner's Manual

LEFT RIGHT
Before assembling the motorcycle, thoroughly
understand the "Safety Check Out" described on
page 52.
After completion of assembly, carefully check the
motorcycle referring to the "Safety Check Out",
then deliver the motorcycle to the customer.
ASSEMBLY

REMOVING THE BRACKET

Remove the bolts to take off the front brake and clutch
master cylinder from the bracket.
NOTE:
• Keep the position of front brake and clutch mas-
ter cylinder with its cap facing upwards until it is
installed.
• The bolts are not necessary to assemble the
motorcycle.
A: Front brake master cylinder
B: Clutch master cylinder
C: Bolt
D: Bracket
Remove the bolts to take off the bracket from the han-
dlebar holder.
NOTE:
• Be careful not to damage the fuel tank.
• The bracket and bolts are not necessary to
assemble the motorcycle.
A: Bracket
B: Bolt
7