Reset Switch (Cn11); Vga Display Connector (Cn12); Cpu Fan Power Supply Connector (Cn13) - Advantech PCI-6771 series User Manual

different connectors at both ends. On one end is the ATX 20-pin
(female type) which connects to the (male) ATX power supply
source. The other end has a 3-pin connector (female type) which
connects to the ATX feature connector (CN10) on the board itself.
This end also has the 6-pin main power connector (P8) and a 6-
pin connector (P9) which is used when the board is mounted on a
passive backplane.

2.22 Reset switch (CN11)

If you install a reset switch, it should be a single pole switch rated
at 10 mA, 5 V. Momentarily pressing the switch will activate a
reset.
For reset switch pin assignments, please see Appendix C.

2.23 VGA Display Connector (CN12)

The PCI-6771 provides a VGA controller for a high resolution
VGA interface. The PCI-6771 CN12 is a DB-15 connector for
VGA monitor input. Pin assignments for the CRT display are
detailed in Appendix C.

2.24 CPU Fan Power Supply Connector (CN13)

This provides power supply to the optional CPU cooling fan. This
connector is only available when +5 V, -12 V and +12 V power is
supplied to the board.
Warning! Before making the connection, make sure the
24 PCI-6771 User's Manual
voltage is absolutely correct and matched with
the correct connector.