Table of Contents
Advertisement
2.25 Ethernet Configuration (CN14)
The PCI-6771 is equipped with a high performance 32-bit PCI-bus
Fast Ethernet interface which is fully compliant with IEEE 802.3u
10/100Base-T specifications. It is supported by all major network
operating systems.
The medium type can be configured via the RSET8139.EXE
program included on the utility disk. (See Chapter 5 for detailed
information.)
RJ-45A connector (CN14)
10/100Base-T connects to the PCI-6771 via an adapter cable to the
RJ-45 standard jack.
Network boot
The network boot feature is built into the BIOS. It can be enabled
or disabled in the chipset setup of the CMOS configuration. Refer
to "BIOS Setting" in Chapter 3 for more information.
2.26 RS-232 connection (COM1-CN15)
Different devices implement the RS-232 standard in different
ways. If you are having problems with a serial device, be sure to
check the pin assignments for the connector.
Chapter 2 Installation
25
Advertisement
Table of Contents
