Reset Switch (Cn21, Pins 6,8); Ir Connector (Cn21 Pins 9,11,13,15,17) - Advantech PCA-6753F User Manual

Half-size all-in-one gxm sbc with cpu, vga/lcd and ethernet

Table of Contents

2.22 Reset switch (CN21, pins 6,8)

If you install a reset switch, it should be a single pole switch rated at 10 mA, 5

V. Momentarily pressing the switch will activate a reset.

For reset switch pin assignments, please see Appendix A.

This connector supports the optional wireless infrared transmitting and receiv-

ing module. This module mounts on the system case. You must configure the

setting through BIOS setup.

Chapter 2 Connecting Peripherals

Table of Contents