Time Zone Control - Simons Voss Technologies 3060 Manual

Page 7
3.0 Additional Functions
The following functions can be activated in the locking plan software:
3.1

Time Zone Control

For TZC version digital lockings, you can program transponders that have locking
authorisation for specific times only. These time zones are deposited in the locking
plan software, and the transponders are then assigned to an appropriate time zone
group.
Example:
3.2 Validity Date
It is possible to program transponders whose authorisation is tied to a validity date
(this also applies to non-TZC-versions):
Transponders that are valid from a specific point in time
(e.g., from 8:00 a.m. on July 12, 2003
Transponders that are valid up to a specific point in time
(e.g., until 5:00 p.m. on July 12, 2003
Transponders that are valid for a specific time interval
(e.g., from July 1, 2003 until July 31, 2003)
One data record is assigned for each activation or expiry date!
3.3 Activation Transponder
Within the scope of the block lock function, all authorised transponders for a digital
locking in the security area are blocked when the alarm system has been activated in
order to avoid false alarms. For emergency situations, transponders can be
programmed (for example, for the fire brigade) that release this block. Afterwards, the
door can be opened with an authorised transponder.
Transponder 3064
Mr. Miller receives the following authorisation:
Monday to Friday
Saturday
Sunday
from 9:00 am, until 6:30 p.m.
from 9:00 am, until 12:45 p.m.
no authorisation