Category Icon Screen Description - BRP Spyder RT Operator's Manual

rmo2010-001-022_cen
1. Use the UP/DOWN button to select the
vertical arrows
2. Use the LEFT/RIGHT button to select the
horizontal arrows
When an item is selected, this sets the
item to the current value.
After acknowledging the initial safety
message at gauge startup, or after
a few seconds elapsed in any other
screen without pressing any RECC
button, the display will automatically
return to the default riding screen.
Category Icon Screen
Description
Default Riding Screen
rmo2010-001-401_aen
DEFAULT RIDING SCREEN
1. Engine coolant temperature (option
package)
2. Fuel level (option package)
3. Digital speedometer
4. Engine speed (not factory set)
5. Radio preset or radio frequency (not factory
set)
1) Engine Coolant Temperature
(except Models with Separate
Analog Gauges)
Bar gauge that continuously indicates
the engine coolant temperature.
NOTE: On models with a separate
analog engine coolant temperature
gauge, the bar gauge is not displayed
in the digital display.
2) Fuel Level (except Models with
Separate Analog Gauges)
Bar gauge that continuously indicates
the amount of fuel left in the fuel tank.
NOTE: On models with a separate
analog fuel level gauge, the bar gauge
is not displayed in the digital display.
3) Digital Speedometer
Displays vehicle speed in kilometers
(km/h) or miles per hour (MPH). To
change units, refer to
SCREEN
4) Engine Speed
Displays engine speed in revolutions
per minute (RPM).
NOTE: This is not a default setting. To
activate this function, refer to
ENCES SCREEN
5) Radio Preset or Radio Frequency
Displays the selected radio preset or
radio frequency.
NOTE: This is not a default function.
To activate this function, refer to
ERENCES SCREEN
Audio Screen
The audio screen will appear with its
last configuration.
_______________
MULTIFUNCTION GAUGE
PREFERENCES
.
.
.
PREFER-
PREF-
35