Digital Display; Multifunction Gauge Startup Information; Multifunction Gauge (Cont'd); Digital Display Description - BRP Spyder RT Operator's Manual

MULTIFUNCTION GAUGE

4) Digital Display

Displays useful real-time information
to the rider and is used as an interface
for the infotainment center.
The display will use a light color when
the ambient light is bright and will au-
tomatically change to a darker color
when the ambient light is dusky.
For a complete description of the dig-
ital display, refer to
DESCRIPTION
.
Multifunction Gauge
Startup Information
A self test is initiated every time the
ignition key is turned ON. The default
riding screen will turn on and indicator
lights will turn on for a moment. This
allows the operator to validate that all
indicators are working properly.
Any time the ignition switch is turned
ON after having been in the OFF posi-
tion for 5 minutes or more, the digital
display will show the following mes-
sage:
– BEFORE OPERATING READ THE
SAFETY CARD
PRESS MODE BUTTON.
Press the MODE button to acknowl-
edge this message to allow engine
starting.

Digital Display Description

The display is divided in several areas
as follows.
______________
32
DIGITAL DISPLAY
ABOVE THEN
rmo2010-001-015_cen
1. Category icons
2. Ambient temperature
3. Clock
4. Gearbox position
5. Cruise control status
6. Trip meter
7. CB communication status (optional)
8. Odometer
9. Main screen
1) Category Icons
There are 5 selectable category icons.
Each icon is linked to a different
screen. See table below.
CATEGORY
ICON
For a complete description, refer to
CATEGORY ICON SCREEN DESCRIP-
TION
.
You can navigate through the category
icons to select several functions and
to change certain settings using the
CATEGORY ICON
SCREEN
Default riding
Audio
CB (optional)
Trip meter
Preferences (only
available when vehicle
is stopped, except for
the trailer mode)