Gps (Option Package); Gps Receiver Installation; Gps Receiver Removal - BRP Spyder RT Operator's Manual

GPS (OPTION PACKAGE)

For GPS operation, refer to GPS man-
ual.
WARNING
Reading the GPS receiver can dis-
tract from the operation of the ve-
hicle, particularly from constantly
scanning the environment. Before
reading the GPS receiver, ensure
your environment is clear and free
from obstacle, and bring the vehi-
cle to a low speed. Additionally,
make sure to often double-check
for obstacles.
WARNING
Remember, the data provided by
the GPS receiver is for reference
only. NEVER rely solely on this in-
formation for your safety.

GPS Receiver Installation

To attach the GPS receiver to its base;
insert the lower part of the GPS re-
ceiver first, then tilt the GPS receiver
towards the top of the base.
Push into place until it locks in.
rsi2010-021-017_a
1. GPS receiver
2. GPS base

GPS Receiver Removal

Removal of the GPS receiver is the re-
verse of installation.
Install the rubber boot over the GPS
cover plate by starting from the top
and then bottom.
CAUTION The
must be installed at all times except
when the GPS is installed onto the
vehicle.
rsi2010-021-019_a
1. GPS base with cover plate installed
2. Cover boot
_______________
rubber boot
43