Gearshift Lever (Sm5 Model); Gearshift Selector (Se5 Model) - BRP Spyder RT Operator's Manual

rmo2010-001-033_a
CLUTCH LEVER ADJUSTMENT
1. Clutch lever
2. Adjuster dial
3. Dot
4) Gearshift Lever
(SM5 Model)
The gearshift lever is in front of the left
footrest.
The gear pattern is Reverse-1- Neu-
tral-2-3-4-5.
rmo2010-001-034_a
Lift up or press down fully to move se-
quentially from one gear to the next.
When the lever is released, it returns
to center where the mechanism resets
for the next shift UP or DOWN. Neutral
(N) is selected by either a half lift from
first gear or a half press from second
gear.
To shift into reverse, refer to the
ATING IN REVERSE
DURES
subsection for detailed instruc-
tions.
OPER-
BASIC PROCE-
in
_______________
5) Gearshift Selector
(SE5 Model)
The gearshift selector is below the left
handgrip.
rmo2010-001-035_a
1. Gearshift selector
Press selector forward to upshift. Pull
selector toward you to downshift.
rmo2010-001-036_a
1. Upshift
2. Downshift
This shifts sequentially from one gear
to the next. Release the selector after
shifting.
To shift through multiple gears, use the
selector multiple times.
To shift into neutral from first gear or
reverse, briefly press or pull the gear
selector. A longer activation will shift
over neutral.
When the gearshift selector is re-
leased, the mechanism resets for the
next shift UP or DOWN.
PRIMARY CONTROLS
13