Power Supply Shelf LEDs
The EPS LEDs are duplicated on the front and back of the device. The
following graphic shows an example of the front of the EPS. There are two
dual colored (green/orange) LEDs for each EPS port:
■
■
ProCurve Switch zl
Power Supply Shelf
J8714A
PoE
Power
Power
Fault
Fault
Power
Supply
EPS Port
Status
Status
E1
E2
Device Connected
Power Status
Power Status LEDs
Connecting the Power Supply Shelf
To Power
Source
5406zl
Figure 2-11. Connecting the EPS to one 5406zl switch
Device Connected
Power Status
Device Connected LEDs
Installing the 5400zl Switches
Installation Procedures
To Power
Source
EPS Cables
2-21