Download Print this page

HP ProCurve 5400zl Installation And Getting Started Manual: Mount The Switch; Rack Or Cabinet Mounting

Procurve 5400zl series switches.
Hide thumbs


5. Mount the Switch

After the modules and optional power supply are installed and you have
verified the switch passes self test, you are ready to mount the switch in a
stable location. The 5400zl switches can be mounted in these ways:

Rack or Cabinet Mounting

The 5400zl switches are designed to be mounted in any EIA-standard 19-inch
telco rack or in an equipment cabinet such as a server cabinet. If you are
installing the switch in an equipment cabinet, read the following "Equipment
Cabinet Note" on
E q u i p m e n t
If you are installing the switch in an equipment cabinet, in place of the
C a b i n e t 
12-24 screws supplied with the switch, use the clips and screws that came with
N o t e
the cabinet. Plan which four holes you will be using in the cabinet and install
all four clips and partially install the two bottom screws, as described in step
2 on the previous page, before proceeding to step 3.
For safe operation, please read the "Installation Precautions" on
The port LEDs on the switch modules go into their normal operational
If the ports are connected to active network devices, the Link LEDs
stay on and the Mode LEDs behave according to the mode selected.
In the default mode (Activity), the Mode LEDs should flicker showing
network activity on the port.
If the ports are not connected to active network devices, the LEDs
will stay off.
in a rack or cabinet
on a horizontal surface
page 2-6
before mounting the switch.
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
For the 5406zl switches, each bracket is attached with four screws as
shown in the following illustration.
Although these procedures show the 6-slot chassis, the procedures are
the same for the 12-slot chassis.
Installing the 5400zl Switches
Installation Procedures



   Related Manuals for HP ProCurve 5400zl

Comments to this Manuals

Symbols: 0
Latest comments: