Toshiba e-STUDIO 206L Troubleshooting Manual page 32

1 TROUBLESHOOTING FOR THE HARDWARE
When the Hole Punch Unit MJ-6103 is installed
Open the Hole Punch Unit cover.
5
Turn the green knob to get the misfed paper out.
6
Close the Hole Punch Unit cover.
7
8 Close the Bridge Kit cover.
Close the upper receiving tray of the finisher.
9
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray can also be closed by pressing the right
side of the lever.
30 Clearing a Paper Misfeed