Toshiba e-STUDIO 206L Troubleshooting Manual page 33

1.TROUBLESHOOTING FOR THE HARDWARE
Misfeed in the lower receiving tray
Raise the lever and open the upper receiving tray of
1
the finisher.
Remove the misfed paper.
2
Lower the shutter of the paper exit portion and
3
remove the paper.
Open the cover holding the handle of the Bridge Unit.
4
When the Hole Punch Unit MJ-6103 is installed, proceed to step 6.
Remove the misfed paper.
5
Proceed to step 9.
1 TROUBLESHOOTING FOR THE HARDWARE
2
2
Clearing a Paper Misfeed
1
1
31