1.TROUBLESHOOTING FOR THE HARDWARE
Misfeed when making copies or prints (using a drawer)
Clear the paper misfeed following the guidance shown on the touch panel.
1
2
Open the paper source drawer, check that the guide
width is correct and there is no folded/curled paper or
overloading, and then close the drawer.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the drawer.
Close all the drawers or covers.
3
1 TROUBLESHOOTING FOR THE HARDWARE
e-STUDIO456 Series
e-STUDIO306LP
Clearing a Paper Misfeed
47