Paper Misfeed In The Reversing Automatic Document Feeder (Optional) (Lower) - Toshiba e-STUDIO 206L Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
 If paper misfeeds occur frequently
The following are the common causes of paper misfeeds. If the problem persists, check for the following situations.
 An unsuitable original is placed on the Reversing Automatic Document Feeder.
 Unavailable paper with the equipment is used.
 Paper sizes are not consistent between the size in a drawer or the bypass tray and the size registered in the
equipment.
 All the misfed paper has not been removed.
 There is too much of a gap between the paper and the side or end guide in the drawer.
 The amount of paper placed in a drawer exceeds the limit indicated on the side guide of the drawer.
 Paper misfeed in the Reversing Automatic Document Feeder (optional) (Lower)
Open the Reversing Automatic Document Feeder.
1
Lower the green lever, open the reverse cover and
2
remove the original.
Close the Reversing Automatic Document Feeder.
3
16 Clearing a Paper Misfeed
2
1
1