Toshiba e-STUDIO 206L Troubleshooting Manual page 43

1.TROUBLESHOOTING FOR THE HARDWARE
While holding the green lever, move the finisher to the
2
left until it stops.
Pull down the green lever on the right-hand unit of the
3
finisher.
The paper exit of the equipment opens.
Turn the green dial clockwise to send the paper and
4
remove it.
5 Return the green lever to its original position.
6 When the Hole Punch Unit is installed and used for
punching holes, while pulling the green dial toward
you, turn it to align the yellow marks on the parts.
1 TROUBLESHOOTING FOR THE HARDWARE
2
2
Clearing a Paper Misfeed
1
1
1
2
41