Toshiba e-STUDIO 206L Troubleshooting Manual page 80

1 TROUBLESHOOTING FOR THE HARDWARE
Open the Hole Punch Unit while pushing the green
3
lever.
After moving the hole punch dust bin to the left, pull it
4
toward you.
Dispose of the paper punchings.
5
Push back in the hole punch dust bin.
6
Return the Hole Punch Unit to its original position.
7
Carefully return the finisher to its original position.
8
Do not put your hand or fingers on the top of the finisher when
closing it.
They could be caught and this could injure you.
Close the front cover of the finisher.
9
78 Cleaning the Hole Punch Dust Bin
1
2