Removal Of The Oil Pump - PEUGEOT 125 CC Workshop Manual

DISASSEMBLY

Removal of the oil pump.

- Remove the 2 screws which secure the 1st
anti-splash plate (1).
- Remove the plate.
- Remove the 2 circlips (2) from the plastic
gears (3) which drive the water pump and oil
pump.
- Remove the plastic gears and the 2 pins (4).
- Remove the 2 screws which secure the 2nd
anti-splash plate (5).
- Remove the plate.
20
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
.
1
2
5
3
4