Removal Of The Temperature Sensor; Removal Of The Thermostat; Removal Of The Camshaft And/Or Rockers - PEUGEOT 125 CC Workshop Manual

DISASSEMBLY

Removal of the temperature sensor.

- The temperature sensor (1) is screwed into
the cylinder head.
- Tightening torque: 1 m.daN.

Removal of the thermostat.

- Remove the 2 bolts and the thermostat
valve (1).
- Remove the thermostat (2).
- Tightening torque: 1 m.daN.
Note: The drain bolt is located on the cover.
Tighteness of the bolt is provided by
a fiber seal.

Removal of the camshaft and/or rockers.

- Remove the 3 screws which secure the
stopper plate (1).
- Remove the stopper plate.
- Remove the camshaft (2).
- Tightening torque: 0,7 m.daN.
Note: The stopper plate has two functions.
to provide:
- proper positioning of the camshaft.
- flow of oil inside the rocker shafts.
16
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
2
1
1
2