Connecting An Ge Line To An Ge Wan Port - Cisco 860 Series Hardware Installation Manual

Connecting an GE Line to an GE WAN Port

Connecting an GE Line to an GE WAN Port
To connect the Gigabit Ethernet (GE) WAN port on the router, follow these steps:
Step 1 Connect one end of the yellow cable to the GE WAN port as shown in
Figure 3-21
1
2
Connect the other end of cable to an available port on the modem.
Step 2
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
3-22
Connecting the GE WAN Port
1
2
Internet Internet Internet
GE WAN port
CAT 5 cable
3
3
Modem connected to the Internet
Chapter 3 Connecting the Router
Figure 3-21.
OL-16193-04