Online Insertion And Removal - Cisco 860 Series Hardware Installation Manual

Chapter 3 Connecting the Router
Figure 3-32
A
1
2
Use a pen, screwdriver, or other small straight tool to gently release a bale-clasp handle if you cannot
Tip
reach it with your fingers.
Step 3 Grasp the SFP on both sides and remove it from the router.

Online Insertion and Removal

Online insertion and removal (OIR) of the SFP module is supported on the Cisco 892F ISRs.
If an SFP module is inserted with auto-failover or SFP media-type already configured, the port is forced
Note
to the speed and duplex capability of the SFP. For a 100 base SFP, the speed is set to 100 and duplex
can be configured to either half or full. For a 1000 base SFP, the speed is set to 1000 and duplex is set
to full.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-04
Figure 5-42 Disconnecting SFP Latch Mechanisms
1
B
Sliding latch
Swing and slide latch
Connecting a Small-form-factor Pluggable Module
2
3
Bale-clasp latch
4
Plastic collar latch
3 4
3-35