Cisco 860 Series Hardware Installation Manual page 25

Chapter 1 Product Overview
Figure 1-11
RP-TNC antennas or connectors on the back panel. Some of the features that are shown may not be
available on your router. However, the feature locations are similar across all Cisco 890 series routers.
Figure 1-11
1
1 Antenna—dipole swivel antenna attached to
RP-TNC connectors (wireless models only)
2 Backup—Data BRI
3
Primary WAN port—FE and GE
4
Auxiliary port
5 Console port
6 8-port 10/100 Ethernet switch
1. The Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected
to ethernet ports 0 through 3. If this feature was not configured with the factory order you must order and install it to enable
the PoE function.
2. The Data BRI port is available only on the Cisco 892 router models.
3. The V.92 port (not shown) is available only on the Cisco 891 router models and is located between the console port and the
Ethernet switch.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-04
shows the back panel details of the Cisco 892-W router. Nonwireless routers do not have
Back Panel of the Cisco 892-W Router
2 3 4
2 3
or V.92 port
5 6
7 PoE power connector for optional PoE
1
module
8 Reset button
9
Power connector
10 Earth ground connection
11 Kensington security slot
Cisco 890 Series ISRs
7 8 9 10 11
1-11