Cisco 860 Series Hardware Installation Manual page 43

Chapter 2 Installing the Router
The mounting holes are bidirectional. You can hang the router with the front bezel facing upward or
Note
downward.
Tip When choosing a location for wall-mounting the router, consider cable limitations and wall structure.
To mount the router on a wall, follow these steps:
Anchor the screws into the wall, leaving 1/8 in. (0.32 cm) between the screw head and the wall.
Step 1
Figure 2-4
Figure 2-4
1
1
Wall-mount holes
Hang the router on the screws, and place the power adapter on a nearby horizontal surface. See
Step 2
Figure
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-04
shows the wall-mount holes located on the underside of the router.
Wall-mount Holes on the Underside of the Router
8.200 in.
2-5.
Installing the Router
3.673 in.
1
5.961 in.
2-7