Starting Circuit Cut-Off System Operation - Yamaha TW200N Service Manual

ELECTRIC STARTING SYSTEM
STARTING CIRCUIT CUT-OFF SYSTEM
OPERATION
If the engine stop switch is set to "
main switch is set to "ON" (both switches are
closed), the starter motor can only operate if at
least one of the following conditions is met:
• The transmission is in neutral (the neutral
switch is closed).
• The clutch lever is pulled to the handlebar
(the clutch switch is closed) and the side-
stand is up (the sidestand switch is closed).
1 Starter motor
2 Battery
3 Starter relay
4 Main fuse
5 Main switch
6 Start switch
7 Diode
8 Clutch switch
9 Sidestand switch
0 Neutral relay
A Engine stop switch
B Neutral switch
– 76 –
ELEC
WHEN THE TRANSMISSION IS
IN NEUTRAL
WHEN THE SIDESTAND IS UP
AND THE CLUTCH LEVER IS
PULLED TO THE HANDLEBAR
– +
" and the