Yamaha TW200N Service Manual page 34

BLEEDING THE HYDRAULIC BRAKE SYSTEM
h. Tighten the bleed screw and then release
the brake lever.
i. Repeat steps (e) to (h) until all of the air
bubbles have disappeared from the brake
fluid in the plastic hose.
j. Tighten the bleed screw to specification.
Bleed screw
6 Nm (0.6 m · kg, 4.3 ft · lb)
k. Fill the brake fluid reservoir to the proper
level with the recommended brake fluid.
Refer to "CHECKING THE BRAKE FLUID
LEVEL".
WARNING
After bleeding the hydraulic brake system,
check the brake operation.
– 27 –
CHK
ADJ