Yamaha TW200N Service Manual page 20

1 Ignition coil
2 Throttle cable
3 Horn lead
4 Canister hose (for California)
5 Canister (for California)
6 Spark plug
7 Starter motor lead
CABLE ROUTING
È Fasten the wire harness, right handlebar switch lead, front brake light
switch lead, clutch switch lead, main switch lead, and throttle cable
with a plastic band.
É Fasten the wire harness, right handlebar switch lead, front brake light
switch lead, clutch switch lead, main switch lead, and resonator hose
with a plastic band.
Ê Fasten the throttle cable and canister hose with a plastic clip. Be sure
to face the ends of the clip downward from the frame. (for California)
Ë Fasten the throttle cable with a plastic locking tie through the hole in
the frame bracket.
– 13 –
SPEC