Yamaha TW200N Service Manual page 19

1 Sidestand switch lead
2 Crankcase breather hose
3 Battery negative terminal
4 Carburetor air vent hose
5 Carburetor overflow hose
6 AC magneto lead
7 Starter motor lead
8 Neutral switch lead
CABLE ROUTING
È Fasten the AC magneto leads with a plastic locking tie to the frame at
the section where the frame starts to curve.
É Fasten the carburetor air vent hose, carburetor overflow hose, and
neutral switch lead with a plastic clip.
– 12 –
SPEC