2-6.5 Atx Power Supply Connector - SOLTEK SL-65LIV User Manual

65LIV
6. Power LED Connector:
CONNECTION: Connected to System Power LED.
FUNCTION: To supply power to "System Power LED".
7. Reset Switch Connector:
CONNECTION: Connected to the case-mounted "Reset Switch".
FUNCTION: To supply power to "Reset Switch" and support system
8. Speaker Connector:
CONNECTION: Connected to the case-mounted Speaker.
FUNCTION: To supply power to the case-mounted Speaker.

2-6.5 ATX Power Supply Connector

• This connector connects to an ATX power supply. The plug from the
power supply should only be inserted to ATX Power connector in a
specific orientation. Find the proper orientation and push it down firmly
to make sure that all pins are aligned.
• Your power supply should support at least 10mA on the 5V standby voltage.
It may cause difficulty to turn on the system power if the power supply
does not support the load.
• For Wake On LAN function, the power supply should support at
least 720mA current.
+5V Standby
Power Good
reboot function.
+12V
GND
VCC
GND
VCC
GND
VCC3
VCC3
28
VCC
VCC
-5V
GND
GND
GND
Power Supply on
GND
-12V
VCC3