SOLTEK SL-65LIV User Manual page 67

ACPI Function Select Enabled only if your computer's operating
POWER MANAGEMENT
• When this option is chosen, the following item appears for user's configuration.
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Power Management
HDD Power Down
Doze Mode
Suspend Mode
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
* Power Management This option allows you to select the type (or degree)
Max Saving
User Define
Min Saving
system supports the Advanced Configuration and
Power Interface (ACPI) specification. Currently,
Windows NT 5.0 supports ACPI.
Power Management
User Define
Disable
Disable
Disable
of power saving for Doze, Standby, and Suspend
modes.
This table describes the power management modes
for your reference:
Maximum power savings. Only Available for SL CPUs.
Inactivity period is 1 minute in each mode.
Set each mode individually. Select time-out period in
the section for each mode stated below.
Minimum power savings. Inactivity period is 1 hour in
each mode (except the hard drive).
67
Chapter 4 BIOS Setup
Item Help
Menu Level