Mitsubishi Electric FR-A720-0.4K Instruction Manual page 63

Operation panel (FR-DU07)
(2) Parameter verification
Whether same parameter values are set in other inverters or not can be checked.
Move the operation panel to the inverter to be verified.
1.
Move it during a stop.
Screen at power-ON
2.
The monitor display appears.
Parameter setting mode
3.
Press to choose the parameter setting mode. (The parameter number read previously appears.).
Selecting the parameter number
4.
Turn until "
appears.
Parameter verification
Turn to change it to the setting value "
5.
Press to read the parameter setting of the verified inverter to the operation panel. ("
If different parameters exist, different parameter numbers and "
Hold down
6.
If there is no difference, "
flickers ... Why?
Set frequencies, etc. may be different. Check set frequencies.
56
" (parameter copy) appears. Press
" (parameter copy verification mode).
to verify.
" and " " flicker to complete verification.
Operation
to read the currently set value. "
" flicker.
" (initial value)
" flickers for about 30s.)