The Geq Page - PRESONUS StudioLive 16.4.2 Owner's Manual

Owner's Manual

The GEQ Page

7.3.4
GEQ Select Tab
GEQ On/Off Button
POWER USER TIP: If you are making adjustments to a graphic EQ, and
you can't hear your changes, make sure the EQ is turned on!
Software: Universal Control, SL Remote, Capture, Studio One Artist
As with StudioLive and VSL, StudioLive Remote includes a Graphic EQ
page so that you can tune the room from any listening position or EQ a
monitor while you are actually standing in front of it onstage. The GEQ
page in StudioLive Remote corresponds directly to the GEQ tab in VSL.
From the GEQ page, you can control and view the following parameters:
• All 31 bands of each graphic EQ (1 stereo for StudioLive
16.0.2, 8 dual-mono for StudioLive 16.4.2 and 24.4.2)
• GEQ insert assignments (StudioLive 24.4.2 only)
• Zoom in for fine adjustments
• Draw the EQ curve you want, rather than adjust each slider manually
Brings a Pair of Graphic EQs into View (StudioLive 16.4.2 and 24.4.2 Only).
To begin making changes to a particular GEQ, you must first select it. To
do this, simply tap on the GEQ pair you'd like to edit.
Turns a Graphic EQ On or Off.
By default, each graphic EQ is turned off. To enable a graphic EQ, tap the
GEQ On button in StudioLive Remote and VSL, or use the GEQ menu on
your StudioLive.
Using StudioLive Remote for iPad
7
7.3
97 97