PRESONUS StudioLive 16.4.2 Owner's Manual page 104

7 Software: Universal Control, SL Remote, Capture, Studio One Artist
7.3 Using StudioLive Remote for iPad
GEQ Flatten Button
Zooming In
Zooming Out
Overview Map
POWER USER TIP: The Overview Map always follows your current position. So if you
scroll left or right while you are zoomed in, the Overview Map will scroll with you.
Draw Tool
GEQ Assignment
98 98
Sets All Graphic EQ Band Levels to 0 dB.
To reset a GEQ to 0 dB, simply tap its Flatten button. This will return each
slider to 0 dB so that no frequency band is boosted or attenuated.
Zooms View In to Make Fine Adjustments.
Press the "+" button to zoom in on the GEQ View. Slide your finger to the
left or right to access additional bands.
Use the Overview Map in the bottom right corner of the GEQ
page to reference your current position within the 31-bands.
Zooms View Out.
Press the "-" button to zoom out the GEQ View. If you have not zoomed all
the way out (so that you don't have all 31 bands on your screen), you can
slide your finger to the left or right to access additional bands.
Use the Overview Map in the bottom right corner of the GEQ
page to reference your current position within the 31 bands.
Provides a Reference Point for the Current Bands in View.
All this zooming in and out provides the ultimate control when making
GEQ adjustments but it's easy to get lost and forget which bands in the
GEQ you're adjusting. This is where the Overview Map comes in.
The Overview Map is located in the bottom right corner of the
GEQ page. Whether you've zoomed in on a few bands, or zoomed
all the way out so that you can see all 31 bands on your iPad,
the Overview Map will highlight which bands are currently in
view and where they are in reference to the rest of the GEQ.
Lets You Draw the EQ Curve with Your Finger.
SL Remote provides flexible control over your graphic EQ settings. You
can use the sliders to control each band individually, or to control several
bands at once, or you can simply draw in your own EQ curve and fine-
tune from there.
To enable EQ Curve Drawing, tap the Draw button, then slide your
finger over the graphic EQ bands to begin drawing your curve.
Each band's slider will snap to your finger as you pass over it.
Inserts Each GEQ on an Aux, Subgroup, or Main Bus Output Pair. (StudioLive 24.4.2
Only)
Like VSL and the StudioLive 24.4.2, SL Remote allows you to choose the
output pair on which you'd like to insert each graphic EQ. To change an
assignment, simply tap on the Assign menu, and then choose the output
pair by tapping it.
PreSonus StudioLive 16.4.2
™