System Menu - PRESONUS StudioLive 16.4.2 Owner's Manual

5 Scenes, Presets, and System Menu
5.4

System Menu

5.4 System Menu
56 56
The 2 internal effects buses are set to Pre 2, which routes each of the 16 channels
after all Fat Channel dynamics and EQ but pre-fader. From this menu, you can
choose between these two Pre positions for each Aux mix. If you have two Aux
buses stereo linked, you only need to set the Pre position on the Link Master.
Remember, the Link Master is the aux that was selected when the link was created.
To find out which Aux is the Link Master, simply select either of the Aux buses in
the pair. The Link Master's ID will be shown in the Select Channel LED readout.
When the StudioLive is connected and synced to a computer via FireWire, the
Status will read "Driver On" and the Sampling Rate will read "FireWire. " Neither
PreSonus StudioLive
In most digital-console manuals, the phrase "System
menu" inspires a sense of dread. However, with the
StudioLive, you have nothing to fear. The System
menu on the StudioLive serves just a few simple
functions, most of which have very little to do with
mixing a show.
Like the Scene and FX Menus, your StudioLive
remembers the last page you viewed in the System
Menu. To quickly jump to Page 1, simply press the
System button twice.
LCD Contrast and LCD Backlight.
Press the System button to access the System
menu. The first page allows you to adjust the LCD
Contrast and LCD Backlight for optimal viewing
in your working environment. These settings
are retained when the unit is powered down.
Aux Pre Position.
Press the Page Down button to access the Aux
Pre Position page. By default, all 6 Aux buses
are set to Pre 1. This places the send of all 16
channels to each aux bus before the fader,
limiter, EQ, and compressor and after the phase-
reverse switch, high-pass filter, and noise gate.
Digital Information.
Press the Page Down button to access the
Digital Information page. From here, you can
change the Sample Rate, view your FireWire
connectivity, route a stereo mix to the S/PDIF
output, assign which StudioLive in a cascaded
chain is the Master, and merge or unmerge
the subgroups in a StudioLive chain.
16.4.2
™