Monitor Bus - PRESONUS StudioLive 16.4.2 Owner's Manual

Owner's Manual

Monitor Bus

4.7.5
Tape Input
Monitor Button
Main Mix Monitor Button Assigns the Main Mix to the Monitor Bus.
FireWire Monitor Button
Solo Bus Monitor
Button
• Auditioning an aux-send monitor mix
• Dialing in the dynamics processing and EQ on a subgroup
• Creating a better blend for instrumental sections (horns, strings, etc.)
Headphone Output
Level Control
Control-Room Monitor
Level Control
The StudioLive features a headphone output and control-room outputs,
giving you the ability to monitor multiple sources on the StudioLive. The
Monitor bus on the StudioLive allows you to monitor the main outputs, Solo
bus, main FireWire return from your computer, and the stereo analog tape
input. Because the Monitor bus is a summing amp, you can even monitor
the World Series on your headphones while running sound at a show.
Assigns the Tape-Input Signal to the Monitor Bus.
The Tape monitor button routes the signal from the tape inputs (tape returns) to the
monitor bus. The level for this input is controlled by the knob in the 2 Track In section.
The Main Mix Monitor button routes the same signal that is being sent from the main
outputs to the Monitor bus. This signal is always pre-fader.
Assigns the Main Left/Right FireWire Return to the Monitor Bus.
The FireWire Monitor button patches the main left/right FireWire return (that is, the
signal from your audio software's master outputs) to the monitor bus. The level for
this input is controlled first by the level set from the computer application producing
the audio (e.g., Studio One) and then by a knob in the 2 Track In section.
Assigns the Solo Bus to the Monitor Outputs.
The Solo Bus Monitor button patches any soloed channel, subgroup, or aux send to
the Monitor bus. This can be useful in any number of ways. For example:
Adjusts the Overall Level of the Headphone Output.
This knob adjusts the overall level for the headphone output.
Adjusts the Overall Level of the Control Room Monitor Outputs.
This knob adjusts the overall level of the control-room monitor outputs.
Controls 4
Master Section 4.7
45 45 45