Assigning Geqs; Geq Presets - PRESONUS studiolive III series Owner's Manual

10 Graphic EQ
10.1

Assigning GEQs

Assigning GEQs
10.1
10.2

GEQ Presets

To assign a Graphic EQ to one of the mixes, select the desired mix and press the GEQ
button. This will open the GEQ screen:
Press the Assign button to select the mix(es) on which you'd like to insert a GEQ.
Touching a mix will insert a Graphic EQ post-fader:
On the upper right hand side of the screen, you will see how many GEQs are available
to be assigned.
You will be alerted when all eight GEQs have been assigned.
Once assigned, you can access the GEQ at any time by pressing the GEQ button on
your desired mix:
Use the Fat Channel encoders to control the Graphic EQ in banks of eight. Use the
Master Control encoder to scroll to a different bank.
To store or load a GEQ preset for the currently selected instance, touch the Presets
button while the GEQ screen is active. This loads the GEQ Presets screen. In this
screen, to load a preset, scroll through the list of existing presets, and touch the
preset of your choice to select it. Press the Recall button to load the selected preset.
To store a GEQ preset, press the Store button. A text entry field appears, letting you
name your new preset. Touch Save to complete the process. Touch Cancel to cancel
the process.
StudioLive™ Series III
Owner's Manual
85