Studiolive Metering Controls - PRESONUS StudioLive 16.4.2 Owner's Manual

Owner's Manual

StudioLive Metering Controls

4.2.1
Power User Tip: It is important to mention that the meters simply overlay the selected Fat Channel
state. For instance, if you have Channel 16 selected and then press the Output button in the Meter
section, the knobs and buttons in the Fat Channel section will still be active, and any changes
made will be applied, but the changes will not be displayed in the Meter section. The advantage
of this is that you can make adjustments in the Fat Channel, press a Meter button, and monitor
your entire mix, then press the same button to return to setting up your Fat Channel selection.
Input Metering Button
Output Metering Button
Gain Reduction Metering
Button
Aux Metering Button
Fader Locate Button
The Meters section of the StudioLive is located below the System section. Each of
these buttons are toggle switches; you turn them on and off by pressing them. The
meter state can also be changed by pressing another button in the Meter section, or
any Select button on the StudioLive, or a Mix or Mix/Pan button in the Aux section.
Turns PFL Input Metering On and Off
Switches the meters to display the pre-dynamics, pre-fader level of the input bus.
Meters have a one-to-one relationship with channels (that is, Meter 1 shows the level
of Channel 1, etc.).
Turns Post-Fader Output Metering On and Off.
Switches the meters to display the post-dynamics, post-fader level of the Input bus.
Meters have a one-to-one relationship with channels (that is, Meter 1 shows the level
of Channel 1, etc.).
Turns Gain Reduction Metering On and Off.
Displays the gain reduction of the input bus. Meters have a one-to-one relationship
with channels (that is, Meter 1 shows the gain reduction of Channel 1 and so on).
Turns Aux Bus Master Out Metering On and Off.
Displays the output level of each of the aux sends.
Meters 1, 3, 5, 7, 9, and 11 display the output levels of Aux Sends 1-6, respectively.
Meters 13 and 15 display the output level of EFX A and EFX B.
Turns Fader-Recall Metering On and Off.
Displays the fader position of the stored scene. When recalling a fader position,
adjust the fader until only the center LED is visible in its meter.
Controls 4
Metering 4.2
33 33 33