PRESONUS StudioLive 16.4.2 Owner's Manual page 61

Owner's Manual
adjusting the Aux 1 GEQ in VSL or in SL Remote. The Main Bus Graphic EQ always functions as a
stereo Graphic EQ when using SL Remote or VSL. For more information, please review Section 7.
gain settings closer to the desired band's gain, and the bandwidth will change
accordingly. Making drastic adjustments too quickly may create an audio artifact
as the new curve is redrawn and crosses over an audio peak. If you are hearing
audio artifacts while setting up your Graphic EQ, try creating a smoother curve.
To begin, use the Value encoder to scroll to an empty position in the GEQ
Preset library. Press the Next button again to navigate to the first letter of the
preset name. Turn the Value Encoder clockwise or counter-clockwise to change
the letter. The StudioLive allows you to customize the name with uppercase
and lowercase letters, as well as a selection of numerals and punctuation
marks. You can insert a space by simply pressing the Tap button. Once you
are satisfied with your changes, press the Store button. It will illuminate while
the GEQ preset is being written to the StudioLive's internal memory. Once
the GEQ preset is saved, the Store button will return to its unlit state.
Scenes, Presets, and System Menu
To open the GEQ menu, press the System button and
navigate to Page 7: GEQ. The StudioLive 16.4.2 features
4 dual-mono (8 channels) Graphic EQs. Each GEQ is
assigned to a specific bus: Main Left, Main Right, and
Aux 1-6. The bus assignment cannot be changed.
Navigate to the Show GEQ field and use the Value knob
to scroll through the different Graphic EQs. Use the
Next and Prev buttons to navigate through each GEQ
screen and the Value knob to change a parameter.
Each Graphic EQs can be controlled individually.
To copy the left side (odd) GEQ settings to the
right side (even), simply scroll to the right side and
press the Recall button. Pressing the Recall button
while using an odd-numbered GEQ will flatten it.
Power User Tip: If you assign a Graphic EQ to a bus
that has been stereo-linked, it will function as a Stereo
Graphic EQ in VSL and in SL Remote. For example, if
you have Aux 1 and Aux 2 stereo-linked, you will be
able to control both sides of the Graphic EQ by simply
Like all other parameters on your StudioLive, your
Graphic EQ settings can be stored and recalled. If you
have created a GEQ setting that you would like to save
to the GEQ Preset library, press the Save button in the
Fat Channel while that GEQ is active; the LCD will
display the GEQ Save menu.
To load a preset to any channel on the StudioLive, first
press the GEQ button and Page down to the desired
GEQ. From the Fat Channel, press the Load button; the
LCD will display the GEQ Load menu. Use the Value
encoder to locate the preset you would like to use.
Once you have made your selection, press the Recall
button. If at any time you would like to cancel this
operation, simply press the Load button again.
5
Graphic Equalizers 5.3
55 55