Level Setting Procedure In Detail - PRESONUS StudioLive 16.4.2 Owner's Manual

8 Tutorials
8.6 Digital Effects
Power User Tip: Using the Tap button on the StudioLive, you can speed up or slow down these repeats or, more
commonly, time the repeats to occur with the tempo of the music.
8.7

Level Setting Procedure in Detail

164 164 164
delays to create more complex time-based effects. The source signal
is delayed so that it is heard later than it actually occurred.
Delay Time. Delay time is the time between the source signal and its
echo. The simplest delay effect is a single repeat. A short delay between
30 and 100 ms can be used to create slap-back echo, while longer delay
times produce a more distant echo. Delay times that are too short to
hear as distinct echoes can be used to create thickening effects. Whether
these echoes are timed with the tempo is a matter of stylistic choice.
Variable Feedback. Variable feedback, or regeneration , produces multiple
decaying repeats. Increasing the feedback value increases the number of echoes
as well as the resonance that is created as one echo disappears into another.
Setting the proper levels is an important part of getting the right sound.
The following steps will assist you in quickly setting your levels.
PreSonus StudioLive 16.4.2
™