PRESONUS StudioLive 16.4.2 Owner's Manual page 19

Owner's Manual
Common fan-outs are DB25 to (8) XLRM and DB25 to (8) TRS. These outputs are
post-gain, pre-insert, and pre-A/D converter. Only the microphone preamps and line-
level inputs are available through the direct outputs. The FireWire returns cannot be
patched to the direct outputs. (See Section 6.4.2 for more information.)
DB25 pin-outs
H = Hot
C = Cold
G = Ground
FireWire Ports. There are two standard 6-pin FireWire 400 ports on the back of the
StudioLive. Either port can be used to connect your StudioLive to a FireWire port on
your computer. If your computer has a 4-pin connector (commonly found on
laptops), you will need to purchase a 4-to-6-pin adapter or cable. These adapters and
cables can be found at your local computer-supply store. Use the second FireWire
port to connect additional FireWire devices (such as external hard drives) to your
computer or to daisy-chain an additional StudioLive mixer. You can connect two
StudioLive 16.4.2 mixers to create a standalone, large-format mixing console with
recording capability.
Rear-Panel Connections
Pre-Insert Balanced Direct Outputs. These are
balanced, direct analog outputs for the 16 channels.
The DB25 connectors divide the channels into two
groups of eight. Balanced DB25 fan-out snakes can be
obtained in various configurations at most recording
and live-sound retailers.
Hookup 3
3.1
13 13