PRESONUS StudioLive 16.4.2 Owner's Manual page 34

Hide thumbs Also See for StudioLive 16.4.2:
Table of Contents

Advertisement

4
Controls
4.1
The Fat Channel
Fat Channel Equalization Section
Low EQ On/Off
Activates Control for the Low Band EQ for
Button
the Selected Input or Output Bus.
This button actives control of the
equalizer's Low band for the
selected channel or bus. The
button will illuminate to indicate
control is active.
The Low EQ band is available for all input and
output buses.
Low EQ
Sets and Displays the Center Frequency of
Frequency
the Low EQ Band.
Control
This encoder sets, and the meter
displays, the center frequency of
the equalizer's Low band. The
center frequency is the middle of
the passband (the mean) between
the lower and upper cutoff
frequencies that define the limits
of the band.
You can adjust the center
frequency from 30 to 555 Hz.
Low EQ Gain
Sets and Displays the Gain Attenuation or
Control
Boost of the Center Frequency.
This encoder sets, and the meter
displays, the gain cut or boost at
the center frequency for the Low
band. The level of the center
frequency can be set between
-15 and +15 dB.
28 28
28
PreSonus StudioLive
Low Shelf EQ
Turns on the Low Shelving EQ for the
Button
Selected Input or Output Bus.
When the Shelf button is not
engaged, the Low band is semi-
parametric. Enabling the Shelf
button turns the Low band into a
low-shelving EQ that alters, by a
fixed amount, a band of low
frequencies at and below a
user-selected shelving frequency.
Power User Tip: A Low Shelving EQ is like a bass-
control knob on a stereo. In this mode, the Center
Frequency control selects the shelving frequency.
Low-Mid EQ
Activates Controls for the Low-Mid EQ for
On/Off Button
the Selected Input or Output Bus.
This button actives the controls for
the equalizer's Low-Mid band for
the selected input or output. The
button will illuminate to indicate
control is active.
The Low-Mid EQ is available for all input and
output buses.
Low-Mid EQ
Sets and Displays the Center Frequency of
Frequency
the Low-Mid EQ.
Control
This encoder sets, and the meter
displays, the center frequency for
the Low-Mid band. You can adjust
the center frequency from 75 Hz to
1.2 kHz.
16.4.2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents