Vsl: Geq Tab - PRESONUS StudioLive24.4.2 Owner's Manual

7 SOFTWARE: Universal Control, Capture, and Studio One Artist
7.2 VSL: Virtual StudioLive

7.2.5 VSL: GEQ Tab

Selecting a GEQ to Edit
GEQ Bus Assignment
84
The StudioLive 24.4.2 features 4 dual-mono Graphic EQs. Assignable
in stereo pairs, these Graphic EQs can be inserted on any of the 10
Aux Buses, the 4 Subgroups, or the Main Bus. In addition to allowing
you to control each Graphic EQ individually, VSL automatically
links each dual-mono Graphic EQ to create a true stereo Graphic
EQ if the pair is inserted onto a stereo bus, allowing you to control
both sides at once (e.g., if you insert GEQ 1/2 onto Subgroups 3
and 4 and stereo-link the Subgroups, GEQ 1/2 will function as
a stereo Graphic EQ rather than a dual-mono Graphic EQ).
Note: The GEQ Menu on your StudioLive does not have to be active
to make changes to a Graphic EQ from VSL. If you wish to use the Fat
Channel encoders to control the Graphic EQs in VSL, then you must
open the GEQ Menu on your StudioLive by pressing the GEQ button.
Along the right side of the GEQ tab, you will see another set of tabs, one
for each dual-mono GEQ. To bring a GEQ in focus so that you can edit it,
simply click on its tab.
To Insert a Graphic EQ on a bus, click on the pull-down menu below
the GEQ's number and select the pair of buses onto which you'd like to
insert it.
PreSonus StudioLive ™ 24.4.2