You can input any number within the setting range 0 to 9999.
For example, the number can be used:
⋅ As a unit number when multiple units are used.
⋅ As a pattern number for each operation application when multiple units are used.
⋅ As the year and month of introduction or inspection.
Parameter
Number
888
Free parameter 1
889
Free parameter 2
The above parameters allow its setting to be changed during operation in any operation mode even if "0" (initial value) is set in Pr. 77 Parameter write
selection.
REMARKS
⋅ The set value is stored in EEPROM as same as other parameter, the setting value is saved even after power off.
⋅ Pr. 888 and Pr. 889 do not influence the inverter operation.