Table of Contents
Advertisement
MQRB4436 / MQRB5143 / MQRB6961 Liner & False Bottom Installation
MQRB44PB1, MQRB51PB1, or MQRB69PB1-[1ea.] Porcelain False Bottom
Single Sided:
MQRB4436PLB, MQRB5143PLB, or MQRB6961PLB-[1ea.] Porcelain Back Liner Panel
MQRB4436 (uses 5143PLE), MQRB5143PLE, or MQRB6961PLE-[2ea.] Porcelain End Panels
Warning
Back Liner, End Panel,
and False Bottom
Installation:
1. Remove Liner Clips
from the inside of the
Firebox (Fig.1).
2. Place the Back Liner
onto the firebox bottom
with bends facing the
rear firebox cover. Lift
into place and set down
on firebox ledge (See
Fig.2).
3. Next install the False
Bottom with larger
Dimension to Front
Glass Opening (Fig.1),
and secure it using DT
screws into the
mounting tabs on the
Burner Tube. Insert
Pilot Shield and False
Bottom Cover into
False Bottom.
4.
Place End Panels on
top of the False Bottom
and tilt into place at
either end of the
Firebox. Replace the
Liner Clips (Fig.1).
Note: Warping and
Discoloration of Porcelain or
Painted Metal Liners Is Not
Covered Under Warranty.
Both Porcelain and Painted
Metal Liners may discolor and
warp during normal operation of
your appliance. This is normal,
and not considered a defect.
: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
Fig.1
MQRB4436/ MQRB5143
Dimensions
Fig.2
Notched Side
on Bottom
Back Liner
1) Tilt into Firebox
Smaller
Dimension goes
Behind
Burner Tube
MQRB6961 Dimensions
2) Lift into place and
Set on Firebox Ledge
3) Place onto Firebox
Bottom behind Burner
(See Thru Instructions on Other Side)
43
Advertisement
Table of Contents
